# Támega river

The Támega is a European river flowing through Portugal. As of 2026-10-16, the Támega was flowing at about 0.55 m³/s at the Rabal, 2818 gauge.

**Canonical name:** Támega

**Countries:** Portugal

**Maximum upstream drainage area:** 3,316 km²

**Mapped river length:** 140.6 km

**Gauging stations:** 1

**Latest measured discharge:** 0.55 m³/s (Rabal, 2818, 2026-10-16)

## Gauging stations on the Támega

The following gauging station reports discharge for the Támega. Discharge is in cubic metres per second (m³/s).

| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Rabal, 2818 | Spain | 0.55 | Much below normal — 54% below the historic median | 2026-10-16 | instantaneous | SAIH provisional value | SAIH: Ebro, Júcar, Duero, Guadalquivir; CAMELS-ES v1.1.0 — Casado Rodríguez et al., CC BY 4.0, doi:10.5281/zenodo.15040948 | 41.849, -7.435 | [source](https://www.miteco.gob.es/es/agua/temas/evaluacion-de-los-recursos-hidricos/saih.html) |

## Data, sources & timestamps

Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.

Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.

Underlying dataset built 2026-10-16T13:31:53.036165+00:00. This page generated 2026-10-16T13:35:10.972Z. Discharge values carry their own observation dates in the table above.

[Explore the Támega on the interactive map →](/)