Loisach river
The Loisach is a European river flowing through Germany. As of 2026-10-01, the Loisach was flowing at about 6.82 m³/s at the Eschenlohe Brücke gauge.
- Canonical name
- Loisach
- Countries
- Germany
- Maximum upstream drainage area
- 1,018 km²
- Mapped river length
- 56.8 km
- Gauging stations
- 5
- Latest measured discharge
- 6.82 m³/s (Eschenlohe Brücke, 2026-10-01)
Gauging stations on the Loisach
The following 5 gauging stations report discharge for the Loisach, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Eschenlohe Brücke | Germany | 6.82 | — | instantaneous | unvalidated operational value | Gewässerkundlicher Dienst Bayern | 47.598, 11.187 | source | |
| Schlehdorf | Germany | 7.81 | — | instantaneous | unvalidated operational value | Gewässerkundlicher Dienst Bayern | 47.667, 11.325 | source | |
| Beuerberg (virtuell) | Germany | 20.6 | — | instantaneous | unvalidated operational value | Gewässerkundlicher Dienst Bayern | 47.829, 11.417 | source | |
| Bruggen | Germany | 1.57 | — | instantaneous | unvalidated operational value | Gewässerkundlicher Dienst Bayern | 47.834, 11.416 | source | |
| Beuerberg | Germany | 19 | — | instantaneous | unvalidated operational value | Gewässerkundlicher Dienst Bayern | 47.835, 11.415 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.