Berettyó river
The Berettyó is a European river flowing through Romania, Hungary. As of 2026-10-08, the Berettyó was flowing at about 3.15 m³/s at the Szeghalom gauge.
- Canonical name
- Berettyó
- Countries
- Romania, Hungary
- Maximum upstream drainage area
- 7,872 km²
- Mapped river length
- 142.8 km
- Gauging stations
- 3
- Latest measured discharge
- 3.15 m³/s (Szeghalom, 2026-10-08)
Gauging stations on the Berettyó
The following 3 gauging stations report discharge for the Berettyó, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Szeghalom | Hungary | 3.15 | Much below normal58% below the historic median | instantaneous | operational open-data observation | Hungarian General Directorate of Water Management | 47.013, 21.179 | source | |
| Pocsaj | Hungary | 0.324 | Much below normal86% below the historic median | instantaneous | operational open-data observation | Hungarian General Directorate of Water Management | 47.278, 21.797 | source | |
| Kismarja | Hungary | 0.334 | Much below normal85% below the historic median | instantaneous | operational open-data observation | Hungarian General Directorate of Water Management | 47.263, 21.826 | source |
Related rivers
- Bratul Chillia
- Prut
- Olt
- Borcea
- Ialomita
- Fehér-Körös
- Fekete-Körös
- Kraszna
- Túr
- Bratul Sulina
- Bratul Sfintu Gheorghe
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.