Nádor-csatorna river
The Nádor-csatorna is a European river flowing through Hungary. As of 2026-10-08, the Nádor-csatorna was flowing at about 0.555 m³/s at the Káloz, Nádor gauge.
- Canonical name
- Nádor-csatorna
- Countries
- Hungary
- Maximum upstream drainage area
- 3,129 km²
- Mapped river length
- 57.3 km
- Gauging stations
- 3
- Latest measured discharge
- 0.555 m³/s (Káloz, Nádor, 2026-10-08)
Gauging stations on the Nádor-csatorna
The following 3 gauging stations report discharge for the Nádor-csatorna, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Káloz, Nádor | Hungary | 0.555 | — | instantaneous | operational open-data observation | Hungarian General Directorate of Water Management | 46.983, 18.509 | source | |
| Cece | Hungary | 0.19 | Much below normal95% below the historic median | instantaneous | operational open-data observation | Hungarian General Directorate of Water Management | 46.768, 18.616 | source | |
| Sárszentmihály | Hungary | 2.29 | Normal6% below the historic median | instantaneous | operational open-data observation | Hungarian General Directorate of Water Management | 47.162, 18.343 | source |
Related rivers
- Tisza
- Mureș
- Jászsági-főcsatorna
- Maros
- Nagykunsági-főcsatorna
- Hármas-Körös
- Szamos
- Sio
- Sajó
- Sebes-Körös
- Rába
- Kettős-Körös
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.