Ohře river
The Ohře is a European river flowing through Czech Republic. As of 2026-10-08, the Ohře was flowing at about 0.035 m³/s at the Libavské Údolí gauge.
- Canonical name
- Ohře
- Countries
- Czech Republic
- Maximum upstream drainage area
- 5,627 km²
- Mapped river length
- 206 km
- Gauging stations
- 10
- Latest measured discharge
- 0.035 m³/s (Libavské Údolí, 2026-10-08)
Gauging stations on the Ohře
The following 10 gauging stations report discharge for the Ohře, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Libavské Údolí | Czech Republic | 0.035 | Much below normal89% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.129, 12.556 | source | |
| Citice | Czech Republic | 4.631 | Much below normal53% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.173, 12.62 | source | |
| Svatava | Czech Republic | 0.456 | Much below normal76% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.189, 12.629 | source | |
| Karlovy Vary - Dvory | Czech Republic | 0.171 | Much below normal74% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.227, 12.825 | source | |
| Karlovy Vary - Drahovice | Czech Republic | 5.731 | Much below normal63% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.237, 12.881 | source | |
| Kadaň | Czech Republic | 4.244 | Much below normal71% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.369, 13.279 | source | |
| Žatec | Czech Republic | 6.732 | Much below normal64% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.335, 13.54 | source | |
| Postoloprty | Czech Republic | 0.066 | — | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.365, 13.704 | source | |
| Louny | Czech Republic | 8.171 | Much below normal59% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.358, 13.804 | source | |
| VD Skalka | Czech Republic | 2.957 | Much below normal38% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.086, 12.385 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.