Piave river
The Piave is a European river flowing through Italy. As of 2026-10-10, the Piave was flowing at about 1.32 m³/s at the Caorame a Pont (Feltre) gauge.
- Canonical name
- Piave
- Countries
- Italy
- Maximum upstream drainage area
- 4,420 km²
- Mapped river length
- 186.5 km
- Gauging stations
- 5
- Latest measured discharge
- 1.32 m³/s (Caorame a Pont (Feltre), 2026-10-10)
Gauging stations on the Piave
The following 5 gauging stations report discharge for the Piave, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Caorame a Pont (Feltre) | Italy | 1.32 | — | instantaneous | unvalidated operational observation | ARPAV, https://www.arpa.veneto.it/ (CC BY 4.0) | 46.038, 11.969 | source | |
| Piave a Quero | Italy | 8.31 | — | instantaneous | unvalidated operational observation | ARPAV, https://www.arpa.veneto.it/ (CC BY 4.0) | 45.941, 11.923 | source | |
| Piave a Segusino | Italy | 17.53 | — | instantaneous | unvalidated operational observation | ARPAV, https://www.arpa.veneto.it/ (CC BY 4.0) | 45.922, 11.949 | source | |
| Piave a Belluno Ponte Vittoria | Italy | 9.59 | — | instantaneous | unvalidated operational observation | ARPAV, https://www.arpa.veneto.it/ (CC BY 4.0) | 46.134, 12.219 | source | |
| Turriga a Visome (Belluno) | Italy | 0.07 | — | instantaneous | unvalidated operational observation | ARPAV, https://www.arpa.veneto.it/ (CC BY 4.0) | 46.117, 12.2 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.