Tera river
The Tera is a European river flowing through Spain. As of 2026-10-10, the Tera was flowing at about 11.7 m³/s at the Camarzana de Tera, 2541 gauge.
- Canonical name
- Tera
- Countries
- Spain
- Maximum upstream drainage area
- 2,424 km²
- Mapped river length
- 89.6 km
- Gauging stations
- 3
- Latest measured discharge
- 11.7 m³/s (Camarzana de Tera, 2541, 2026-10-10)
Gauging stations on the Tera
The following 3 gauging stations report discharge for the Tera, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Camarzana de Tera, 2541 | Spain | 11.7 | — | instantaneous | SAIH provisional value | SAIH: Ebro, Júcar, Duero, Guadalquivir; CAMELS-ES v1.1.0 — Casado Rodríguez et al., CC BY 4.0, doi:10.5281/zenodo.15040948 | 41.987, -6.041 | source | |
| Camarzana-Regato, 2716 | Spain | 0 | Much below normal100% below the historic median | instantaneous | SAIH provisional value | SAIH: Ebro, Júcar, Duero, Guadalquivir; CAMELS-ES v1.1.0 — Casado Rodríguez et al., CC BY 4.0, doi:10.5281/zenodo.15040948 | 41.998, -6.018 | source | |
| Mózar de Valverde, 2099 | Spain | 11.29 | — | instantaneous | SAIH provisional value | SAIH: Ebro, Júcar, Duero, Guadalquivir; CAMELS-ES v1.1.0 — Casado Rodríguez et al., CC BY 4.0, doi:10.5281/zenodo.15040948 | 41.942, -5.784 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.