Amblève river
The Amblève is a European river flowing through Belgium. As of 2026-10-11, the Amblève was flowing at about 0.267 m³/s at the Trois-Ponts gauge.
- Canonical name
- Amblève
- Countries
- Belgium
- Maximum upstream drainage area
- 1,065 km²
- Mapped river length
- 37.6 km
- Gauging stations
- 4
- Latest measured discharge
- 0.267 m³/s (Trois-Ponts, 2026-10-11)
Gauging stations on the Amblève
The following 4 gauging stations report discharge for the Amblève, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Trois-Ponts | Belgium | 0.267 | Much below normal78% below the historic median | instantaneous | operational 10-minute value | Service public de Wallonie Hydrométrie | 50.372, 5.872 | source | |
| Stavelot | Belgium | 4.184 | Normal7% below the historic median | instantaneous | operational 10-minute value | Service public de Wallonie Hydrométrie | 50.378, 5.885 | source | |
| La Gleize | Belgium | 3.643 | Much below normal54% below the historic median | instantaneous | operational 10-minute value | Service public de Wallonie Hydrométrie | 50.401, 5.853 | source | |
| Lorcé | Belgium | 0.282 | Much below normal71% below the historic median | instantaneous | operational 10-minute value | Service public de Wallonie Hydrométrie | 50.41, 5.769 | source |
Related rivers
- Berwijn
- Scheldt
- Ruisseau de Gelbressée
- Ruisseau des Fonds de Leffe
- Meuse
- Lys
- Weesbeek
- Helpe Mineure
- Demer
- Ruisseau de Lembrée
- Molenbeek
- Lhomme
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.