Dyje river
The Dyje is a European river flowing through Czech Republic, Austria. As of 2026-10-11, the Dyje was flowing at about 8.25 m³/s at the VD Nové Mlýny gauge.
- Canonical name
- Dyje
- Countries
- Czech Republic, Austria
- Maximum upstream drainage area
- 12,725 km²
- Mapped river length
- 180.3 km
- Gauging stations
- 7
- Latest measured discharge
- 8.25 m³/s (VD Nové Mlýny, 2026-10-11)
Gauging stations on the Dyje
The following 7 gauging stations report discharge for the Dyje, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| VD Nové Mlýny | Czech Republic | 8.25 | — | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 48.858, 16.724 | source | |
| Břeclav-Ladná | Czech Republic | 8.468 | Much below normal61% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 48.804, 16.854 | source | |
| Trávní Dvůr | Czech Republic | 3.438 | Much below normal46% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 48.791, 16.438 | source | |
| Raabs an der Thaya | Czech Republic | 1.11 | — | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 48.848, 15.488 | source | |
| Podhradí nad Dyjí | Czech Republic | 2.409 | Below normal42% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 48.903, 15.691 | source | |
| Vranov - Hamry | Czech Republic | 3.105 | Much below normal37% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 48.895, 15.819 | source | |
| Znojmo | Czech Republic | 3.659 | Below normal28% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 48.854, 16.043 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.