Répce river
The Répce is a European river flowing through Hungary. As of 2026-10-11, the Répce was flowing at about 0.2 m³/s at the Répcevis gauge.
- Canonical name
- Répce
- Countries
- Hungary
- Maximum upstream drainage area
- 1,864 km²
- Mapped river length
- 81.7 km
- Gauging stations
- 4
- Latest measured discharge
- 0.2 m³/s (Répcevis, 2026-10-11)
Gauging stations on the Répce
The following 4 gauging stations report discharge for the Répce, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Répcevis | Hungary | 0.2 | Much below normal88% below the historic median | instantaneous | operational open-data observation | Hungarian General Directorate of Water Management | 47.443, 16.681 | source | |
| Csepreg | Hungary | 0.588 | Much below normal63% below the historic median | instantaneous | operational open-data observation | Hungarian General Directorate of Water Management | 47.403, 16.712 | source | |
| Gór tározó zsilip alvíz | Hungary | 0.575 | Much below normal66% below the historic median | instantaneous | operational open-data observation | Hungarian General Directorate of Water Management | 47.361, 16.798 | source | |
| Tompaládony | Hungary | 0.38 | Much below normal83% below the historic median | instantaneous | operational open-data observation | Hungarian General Directorate of Water Management | 47.368, 16.889 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.