Kleine Gete river
The Kleine Gete is a European river flowing through Belgium. As of 2026-10-14, the Kleine Gete was flowing at about 0.183 m³/s at the Zoutleeuw/Kleine Gete gauge.
- Canonical name
- Kleine Gete
- Countries
- Belgium
- Maximum upstream drainage area
- 935 km²
- Mapped river length
- 13.8 km
- Gauging stations
- 3
- Latest measured discharge
- 0.183 m³/s (Zoutleeuw/Kleine Gete, 2026-10-14)
Gauging stations on the Kleine Gete
The following 3 gauging stations report discharge for the Kleine Gete, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Zoutleeuw/Kleine Gete | Belgium | 0.183 | Much below normal86% below the historic median | instantaneous | operational 15-minute value | Vlaamse Milieumaatschappij waterinfo.be | 50.855, 5.109 | source | |
| Budingen/Gete | Belgium | 1.09 | Much below normal60% below the historic median | instantaneous | operational 15-minute value | Vlaamse Milieumaatschappij waterinfo.be | 50.863, 5.107 | source | |
| Rummen/Melsterbeek/Lutzestraat | Belgium | 0.241 | Much below normal56% below the historic median | instantaneous | operational 15-minute value | Vlaamse Milieumaatschappij waterinfo.be | 50.873, 5.142 | source |
Related rivers
- Berwijn
- Scheldt
- Ruisseau de Gelbressée
- Ruisseau des Fonds de Leffe
- Meuse
- Lys
- Weesbeek
- Helpe Mineure
- Demer
- Ruisseau de Lembrée
- Molenbeek
- Lhomme
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.