Tille river
Also known as: La Tille
The Tille (also known as La Tille) is a European river flowing through France. As of 2026-10-13, the Tille was flowing at about 0.041 m³/s at the La Tille à Arceau [Arcelot] gauge.
- Canonical name
- Tille
- Local names / aliases
- La Tille
- Countries
- France
- Maximum upstream drainage area
- 1,028 km²
- Mapped river length
- 55.1 km
- Gauging stations
- 4
- Latest measured discharge
- 0.041 m³/s (La Tille à Arceau [Arcelot], 2026-10-13)
Gauging stations on the Tille
The following 4 gauging stations report discharge for the Tille, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| La Tille à Arceau [Arcelot] | France | 0.041 | Much below normal97% below the historic median | daily mean | Donnée brute | Hub'Eau Hydrométrie | 47.373, 5.189 | source | |
| La Tille à Cessey-sur-Tille | France | 0.172 | Below normal88% below the historic median | daily mean | Donnée brute | Hub'Eau Hydrométrie | 47.28, 5.217 | source | |
| La Norges à Genlis | France | 0.109 | Much below normal89% below the historic median | daily mean | Donnée brute | Hub'Eau Hydrométrie | 47.238, 5.221 | source | |
| La Tille à Champdôtre | France | 0.229 | Much below normal91% below the historic median | daily mean | Donnée brute | Hub'Eau Hydrométrie | 47.179, 5.3 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.