Arlanzón river
The Arlanzón is a European river flowing through Spain. As of 2026-10-16, the Arlanzón was flowing at about 0.13 m³/s at the Burgos-Vena, 2549 gauge.
- Canonical name
- Arlanzón
- Countries
- Spain
- Maximum upstream drainage area
- 2,606 km²
- Mapped river length
- 58.2 km
- Gauging stations
- 3
- Latest measured discharge
- 0.13 m³/s (Burgos-Vena, 2549, 2026-10-16)
Gauging stations on the Arlanzón
The following 3 gauging stations report discharge for the Arlanzón, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Burgos-Vena, 2549 | Spain | 0.13 | — | instantaneous | SAIH provisional value | SAIH: Ebro, Júcar, Duero, Guadalquivir; CAMELS-ES v1.1.0 — Casado Rodríguez et al., CC BY 4.0, doi:10.5281/zenodo.15040948 | 42.344, -3.697 | source | |
| Burgos-Arlanzón, 2139 | Spain | 0.81 | Much below normal43% below the historic median | instantaneous | SAIH provisional value | SAIH: Ebro, Júcar, Duero, Guadalquivir; CAMELS-ES v1.1.0 — Casado Rodríguez et al., CC BY 4.0, doi:10.5281/zenodo.15040948 | 42.348, -3.737 | source | |
| Celada del Camino, 2116 | Spain | 1.95 | Much below normal50% below the historic median | instantaneous | SAIH provisional value | SAIH: Ebro, Júcar, Duero, Guadalquivir; CAMELS-ES v1.1.0 — Casado Rodríguez et al., CC BY 4.0, doi:10.5281/zenodo.15040948 | 42.255, -3.928 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.