Indalsälven river
The Indalsälven is a European river flowing through Sweden. As of 2026-10-16, the Indalsälven was flowing at about 27.8 m³/s at the FYRÅS gauge.
- Canonical name
- Indalsälven
- Countries
- Sweden
- Maximum upstream drainage area
- 25,593 km²
- Mapped river length
- 842 km
- Gauging stations
- 1
- Classification
- Major European river
- Latest measured discharge
- 27.8 m³/s (FYRÅS, 2026-10-16)
Gauging stations on the Indalsälven
The following gauging station reports discharge for the Indalsälven. Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| FYRÅS | Sweden | 27.8 | Normal13% above the historic median | instantaneous | SMHI quality O | Swedish Meteorological and Hydrological Institute | 63.472, 15.437 | source |
Related rivers
- Gta lv
- Torne
- Ångermanälven
- Dalälven
- Luleälven
- Stora Luleälven
- Kalixälven
- Umeälven
- Motala ström
- Skellefteälven
- Kalix
- Piteälven
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.