Támega river
The Támega is a European river flowing through Portugal. As of 2026-10-16, the Támega was flowing at about 0.55 m³/s at the Rabal, 2818 gauge.
- Canonical name
- Támega
- Countries
- Portugal
- Maximum upstream drainage area
- 3,316 km²
- Mapped river length
- 140.6 km
- Gauging stations
- 1
- Latest measured discharge
- 0.55 m³/s (Rabal, 2818, 2026-10-16)
Gauging stations on the Támega
The following gauging station reports discharge for the Támega. Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Rabal, 2818 | Spain | 0.55 | Much below normal54% below the historic median | instantaneous | SAIH provisional value | SAIH: Ebro, Júcar, Duero, Guadalquivir; CAMELS-ES v1.1.0 — Casado Rodríguez et al., CC BY 4.0, doi:10.5281/zenodo.15040948 | 41.849, -7.435 | source |
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.