Blanice river
The Blanice is a European river flowing through Czech Republic. As of 2026-10-11, the Blanice was flowing at about 0.67 m³/s at the Bavorov gauge.
- Canonical name
- Blanice
- Countries
- Czech Republic
- Maximum upstream drainage area
- 882 km²
- Mapped river length
- 39.5 km
- Gauging stations
- 3
- Latest measured discharge
- 0.67 m³/s (Bavorov, 2026-10-11)
Gauging stations on the Blanice
The following 3 gauging stations report discharge for the Blanice, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Bavorov | Czech Republic | 0.67 | — | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 49.123, 14.092 | source | |
| Heřmaň | Czech Republic | 0.464 | Much below normal84% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 49.246, 14.132 | source | |
| Radonice I | Czech Republic | 0.205 | Much below normal81% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 49.789, 14.933 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.