Tichá Orlice river
The Tichá Orlice is a European river flowing through Czech Republic. As of 2026-10-11, the Tichá Orlice was flowing at about 0.608 m³/s at the Dolní Libchavy gauge.
- Canonical name
- Tichá Orlice
- Countries
- Czech Republic
- Maximum upstream drainage area
- 756 km²
- Mapped river length
- 38.8 km
- Gauging stations
- 2
- Latest measured discharge
- 0.608 m³/s (Dolní Libchavy, 2026-10-11)
Gauging stations on the Tichá Orlice
The following 2 gauging stations report discharge for the Tichá Orlice, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Dolní Libchavy | Czech Republic | 0.608 | Much below normal63% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 49.989, 16.396 | source | |
| Čermná nad Orlicí | Czech Republic | 0.891 | Much below normal72% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.078, 16.135 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.