Orlice river
The Orlice is a European river flowing through Czech Republic. As of 2026-10-16, the Orlice was flowing at about 2.356 m³/s at the Týniště nad Orlicí gauge.
- Canonical name
- Orlice
- Countries
- Czech Republic
- Maximum upstream drainage area
- 2,032 km²
- Mapped river length
- 25.1 km
- Gauging stations
- 1
- Latest measured discharge
- 2.356 m³/s (Týniště nad Orlicí, 2026-10-16)
Gauging stations on the Orlice
The following gauging station reports discharge for the Orlice. Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Týniště nad Orlicí | Czech Republic | 2.356 | Much below normal69% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.149, 16.067 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.