Vltava river
The Vltava is a European river flowing through Czech Republic. As of 2026-10-16, the Vltava was flowing at about 35.241 m³/s at the Praha - Chuchle gauge.
- Canonical name
- Vltava
- Countries
- Czech Republic
- Maximum upstream drainage area
- 28,095 km²
- Mapped river length
- 333.8 km
- Gauging stations
- 11
- Classification
- Major European river
- Latest measured discharge
- 35.241 m³/s (Praha - Chuchle, 2026-10-16)
Gauging stations on the Vltava
The following 11 gauging stations report discharge for the Vltava, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Praha - Chuchle | Czech Republic | 35.241 | Much below normal64% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.027, 14.397 | source | |
| Praha - Hlubočepy | Czech Republic | 0.088 | — | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.042, 14.39 | source | |
| Praha - Nusle | Czech Republic | 0.358 | Normal23% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.067, 14.43 | source | |
| Vraňany | Czech Republic | 36.124 | Much below normal65% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 50.313, 14.363 | source | |
| Zbraslav | Czech Republic | 41.04 | Below normal42% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 49.972, 14.397 | source | |
| Štěchovice | Czech Republic | 0.219 | Much below normal70% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 49.848, 14.403 | source | |
| České Budějovice | Czech Republic | 7.66 | Much below normal53% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 48.981, 14.462 | source | |
| Vyšší Brod | Czech Republic | 5.978 | Much below normal36% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 48.625, 14.306 | source | |
| Zátoň | Czech Republic | 6.264 | Much below normal42% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 48.727, 14.337 | source | |
| Český Krumlov | Czech Republic | 0.116 | Much below normal79% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 48.813, 14.313 | source | |
| Březí | Czech Republic | 7.226 | Much below normal42% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 48.917, 14.431 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.