Radbuza river
The Radbuza is a European river flowing through Czech Republic. As of 2026-10-16, the Radbuza was flowing at about 0.185 m³/s at the Staňkov gauge.
- Canonical name
- Radbuza
- Countries
- Czech Republic
- Maximum upstream drainage area
- 1,244 km²
- Mapped river length
- 39.1 km
- Gauging stations
- 3
- Latest measured discharge
- 0.185 m³/s (Staňkov, 2026-10-16)
Gauging stations on the Radbuza
The following 3 gauging stations report discharge for the Radbuza, ordered downstream (largest catchment first). Discharge is in cubic metres per second (m³/s).
| Station | Country | Discharge (m³/s) | Historical Comparison | Observed | Measurement | Data quality | Provider | Lat, Lon | Source |
|---|---|---|---|---|---|---|---|---|---|
| Staňkov | Czech Republic | 0.185 | Much below normal90% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 49.553, 13.071 | source | |
| Lhota | Czech Republic | 0.908 | Much below normal65% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 49.689, 13.326 | source | |
| VD České Údolí | Czech Republic | 0.655 | Much below normal78% below the historic median | instantaneous | CHMI operational data | Czech Hydrometeorological Institute | 49.718, 13.361 | source |
Related rivers
Data, sources & timestamps
Geometry is the HydroRIVERS network (HydroSHEDS): European reaches with at least 500 km² of upstream catchment, merged into chains between confluences. Flow direction comes from the network itself; river names are the canonical English label joined from provider metadata and Natural Earth, with local-language aliases retained.
Discharge is normalised observed streamflow from official national hydrology providers, measured where a gauge sits on the river and interpolated between gauges. Pale/estimated values are derived from drainage area × the local specific discharge of nearby gauges and are never presented as measurements.